<< If This is Thursday -- | Main | "Easter" Baby Socks >>

Zig Zag Baby Scarf Pattern

| 1 Comment
I got a polite request to share the pattern for the scarf I made for Z.  No problem!  This is a nice, simple pattern and it is easy to work in almost any yarn - gauge is not critical at all to this pattern.  My recommendation is worsted-weight superwash or a soft acrylic just to keep it fast and fun and washable (if it is for a baby... if it's for an adult, the washability is clearly dependent on the recipient).   You don't need all that much of any one color of yarn -- in fact, even a few yards is fine. Your yarns also do not have to be the exact same type of yarn as long as the washability and gauge characteristics are comparable.  Before you start, put your yarns in some order that you like so that you can make sure you get a color progression you like.

This is a simple pattern, so it is easily scaled up for any size recipient, but I'll provide the details for a toddler/child just to keep it simple.

First off, cast on 16 or so stitches on needles that don't give you too dense a a fabric with the yarn you are working with.  Scarves usually do better with a little drape.  This pattern is a modified K2 P2 ribbing, so it will pull in a little, creating a little extra thickness.  However, because the ribbing is shifted every two rows, it won't pull in like straight K2P2 ribbing, instead it will lay flat and maintain most of it's width*.  Obviously, you can cast on any number of stitches that is divisible by 2.  I selected my starting point based on the amount of yarn I had and a general examination of Z's neck.  I didn't want it to be too wide or it wouldn't sit comfortably around her neck.

After casting on, knit 4 rows -- this will create a little garter stitch border for the scarf, and a nice flat foundation to start on.  Now it's time to start the pattern!

20081204_ProgressiveRibbing.jpg
You can choose to start with either a left or right progressing (slanting) ribbing.  The charts I've provided include a two stitch garter stitch border on either edge of the ribbing (stitches 1 & 2 and 15 & 16) the edge stitches are indicated with the grey shading.  Please note that the "|" symbols represents "knit on the right side, purl on the wrong side" (except for the edging which should be a knit stitch no matter which side you are working) and the "-" symbol represents "purl on the right side knit on the wrong side".  This pattern has an 8 row repeat interval.  So once you start, you just keep going, starting with row 1 again after you finish an 8 row repeat.  Just keep knitting until you run out of yarn or want to change color.  It doesn't matter what row you end on.  If you'd like my original excel file with the chart in it, you can
download Zigzag.xls by clicking here.

When you complete a color, you want to end that color with the end of a row.  What you do next depends on whether you ended with a right side or wrong side row.

  • If you ended with a wrong side row, on the next row you're going to switch direction.  To figure out what your next row would be, identify the row you finished with in which ever ribbing direction you were working (as an example, let's say you ended with row 4 of the left progressing ribbing).  Now look in the chart for the alternate direction and find the exact same row (in my example, this would be row 8 in the right progressing chart).  Your next row is going to be the row that follows the row you just finished in the new chart.  So in my example, since my end row would be row 8 in the right progressing chart, I'd start my new color with row 1 of the right progressing chart.  
  • If you ended with a right side row, you're going to complete the wrong side row for the pattern you are working on before switching direction.  So, for example, if you ended with row 5 of the right progressing chart, you would work row 6 of the right progressing chart in your new color.  Row 6 in the right progressing chart is the same as row 6 in the left progressing chart, so your next row would be row 7 of the left progressing chart.
After you've switched charts, you continue to knit in pattern with that chart until you get to the next color change. After which, you repeat the steps for switching directions again. 

You're going to continue knitting and switching directions until you're on your last color.  When you're on your last color (ideally your scarf will be somewhere between 3 to 5 feet long for a child, for an adult, somewhere between 6-7 feet is usually a good length), you're going to continue knitting in pattern until you think you have about enough yarn left for 4 rows of straight knitting plus your cast off.  At this point, you're going to stop knitting in pattern and just knit 4 rows in garter stitch (like you did to begin the scarf and bind off with the cast-off of your choice.

Now all you have to do is weave in your ends, et voila! a fun, sweet baby scarf is ready for it's recipient.

20081201_DICScarfZ.jpg If you use this pattern and have any questions, please don't hesitate to email me or post your questions in the comments.  I'll also try to link to this in Ravelry for those of you who might want to add it to your queue so that you can remember it for later.

* as a general design note, stitch patterns with an equal number of knits and purls in each row will lie flat. 

this is the cutest!
and this is the Perfect Scarf to go with the matching cardigan/sweater!
it features the yarn so nicely too...yum!
:o) have a great weekend! ek.

Entry Categories

Entry Tags

Recent Entries

And the Blog Upgrades Continue
Thought I would pop in just to say a few words about where the blog is...I am fully migrated to…
Wanna Help a Shepherd?
I'm still not done with the upgrade, but since the world does not wait to me, I wanted to make…
Comment and Blogging Issues
Hi All --It has become apparent to me that my blog system needs some overhauling.  I can't explain why so…